What is the purpose of chair bars?

Chair reinforcement or simply chair rods are small structural elements that are used to place the reinforcement bars in the correct position and maintains the correct space between the top and bottom reinforcements. Chair bars are used primarily on the slab and flooring.

What is the use of chair reinforcement?

Chair reinforcement or simply chair bars are small structural elements used to properly place reinforcement bars in position and maintain the proper space between the top and bottom reinforcements. Chair bars are mainly used in slab and footing. It is one of the most important parts of the raft foundations.

What is the minimum spacing for bar chairs?


You’ll want to leave enough room between each bar stool so you can sit comfortably without feeling crowded and get up with ease. A good rule of thumb is to leave at least 6 inches between each stool. If your stools swivel or have arms, you should allow at least 8 or 10 inches between them.

What is BBS in civil engineering?

Bar Bending Schedule (BBS) helps to determine the quantity of steel required in construction of your house. This helps to get the accurate estimation of steel. Once the calculation of cutting and bending is done it reduces the wastage of steel and it becomes economic.

What is a chair rail in construction?

Chair rail by definition is molding on an interior wall that is attached horizontally around the perimeter of a room. Most people associate chair rail as a type of trim that prevents chairs from rubbing against the walls.

What is chair in safety?

CHAIR, an acronym for Construction Hazard Assessment and Implication Review, is a tool that has been developed to bring together all the key stakeholders involved in design to help identify and eliminate (or minimise) inherent risks in a structured and systematic way.

What is the maximum spacing of bar chairs?

Bar chairs must be spaced at not more than 800 mm centres for steel fabric.

How many types of chairs are there?

20 Types of Chairs Explained – Popular Styles of Chairs.

Why chair bars are provided in slab?

5) chair bar provided in footing and slab reduce the chance of collapsing and touching of upper cage reinforcement and lower cage reinforcement to one another and reduce the failure of compression and tension zone in concrete structure.

Why do we use reinforcement bar?

Rebar (short for reinforcing bar), known when massed as reinforcing steel or reinforcement steel, is a steel bar used as a tension device in reinforced concrete and reinforced masonry structures to strengthen and aid the concrete under tension. Concrete is strong under compression, but has weak tensile strength.

Why do we use chairs in slabs?

Chairs are contraptions provided in slabs and the like to sere as sturdy enough seats for the longitudinal reinforcement to sit on and be supported before concreting of the member can proceed. They come in various heights, kinds, configurations and materials.

What is standard bar chair height?

Bar-height stools are the tallest on this list, usually measuring between 28” to 33” high at the seat. This type of seating is usually what you’ll find in restaurants and bars and is best used with bar height tables that measure 41” to 43” high.

What is ideal bar height?

The standard kitchen bar height is 42 inches.

Bar height counters are great for eating breakfast and spreading out appetizers during a party. Generally, if a breakfast table is positioned near the bar top, the chairs at the table will be at standard height.

What height should a bar seat be?

Bar stool heights are generally 28″-30″ from floor to seat. Pair with a table or counter 40″-42″ in height.

What is RCC full form?

Reinforced concrete (RC), also called reinforced cement concrete (RCC) and ferroconcrete, is a composite material in which concrete’s relatively low tensile strength and ductility are compensated for by the inclusion of reinforcement having higher tensile strength or ductility.

What is the unit weight of RCC?

Unit weight of RCC = 2500kg/m^3.

How do you calculate stirrups?

Now we have everything to calculate the cutting length of our example diamond stirrup. And the formula is, = (4 × arm length) + (2 × hook length) — bend deduction.


  1. https://www.lceted.com/2021/05/Chair-bars-cutting-length-Calculation.html
  2. https://www.retlawindustries.com/Info/PlasticRebarChairs
  3. https://dailycivil.com/chair-bars-in-reinforcement-function-how-to-calculate-cutting-length/
  4. https://www.frontgate.com/homeplusstyle/entertaining/the-bar-stool-measuring-guide/
  5. https://shyamsteel.com/blogs/what-is-bar-bending-schedule-bbs-of-tmt-bar/
  6. https://www.buildwithbmc.com/bmc/s/trending/wainscoting-vs-chair-rail
  7. https://www.safedesignaustralia.com.au/wp-content/uploads/2018/10/CHAIR_Safety_in_Design_Tool_WorkCoverNSW.pdf
  8. https://ncc.abcb.gov.au/editions/2019-a1/ncc-2019-volume-two-amendment-1/part-32-footings-and-slabs/part-323-concrete-and
  9. https://www.elledecor.com/design-decorate/trends/g30123056/chair-types-styles/
  10. https://civilsir.com/how-to-calculate-cutting-length-of-chair-bar/
  11. https://en.wikipedia.org/wiki/Rebar
  12. https://readcivil.com/why-are-chairs-provided-in-a-slab/
  13. https://www.nationalbusinessfurniture.com/blog/difference-between-standard-counter-bar-height-stools
  14. https://www.eastwoodhomes.com/blog/kitchen-island-design-bar-height-or-counter-height
  15. https://www.signaturedesignskitchenbath.com/blog/how-to-choose-your-bar-stool-height-kitchen-seating-guide
  16. https://en.wikipedia.org/wiki/Reinforced_concrete
  17. https://www.indiabix.com/civil-engineering/rcc-structures-design/discussion-1807
  18. https://medium.com/acivilengineer/how-to-calculate-the-cutting-length-of-stirrups-in-columns-3091d7e16215