What is the standard size for a dining chair?

Dining Chair: The seat height averages 18″ to 20″, seat width averages about 15-1/2″ in back and 18″ in front, and average seat depth is 16″ to 18″. If armrests are used, they should be 7″ to 9″ above the seat but able to fit under the table apron.

How wide is a dining chair CM?

How wide are side chairs? Side chairs are designed with a diverse variety of styles and materials, but the width of a side chair is commonly established between 16.5”-22” (42-56 cm).

How many cm should be between dining chairs?

Finding the right chair spacing

We recommend leaving between 60cm and 80cm per place setting, to allow for enough elbow room as well as shared space.

How many cm is an average chair?

How tall is a typical seat? Seats are typically required to be between 16 to 20 inches (40.6 cm – 50.8 cm) tall and at least 18 inches (45.7 cm) deep. If backs are present on the seats, they typically are at least 14 inches (35.5 cm) high.

How deep is a dining chair in CM?

Because of this, mass produced chairs, in schools and public places, for example, are typically 38 to 43 cm in depth. However, the depth of many dining chairs will be deeper than this to offer even more support and comfort.

How do you measure the size of a chair?

Measure the width of the chair arm along the front (across the widest point). Measure the height of the back from the top of the chair to the seat of the chair. Measure the height of the chair along the front from the lowest portion of upholstered surface up toward where it meets the cushion.

Are dining chairs a standard height?

The average height for a dining table is about 30 inches, so dining chairs generally need to be around 18 inches high. There should be around 12 inches between the tabletop and the seat. If you follow this rule of thumb, it’s likely that you’ll find the perfect height!

How do you measure chair length?

  • Step 1: Choose the unit in which you want to measure length. If you want a value in centimeters, then take the centimeters side of the ruler.
  • Step 2: Place the object beside the ruler starting from point 0 on it.
  • Step 3: Look at the endpoint and mark the value.

Is 90cm wide enough for dining table?

The recommended comfortable space per person for a typical dining table is 70cm wide (elbow room) by 90cm deep (to slide out your chair); however if you are prepared to squeeze in and get cosy for a special occasion you can get away with as little as 50cm wide per person.

What is the distance between chairs?

Space between dining chairs: Ideally, provide about 24″ between chairs to prevent hitting elbows and to allow people to slide chairs in and out without any collisions or bruised knuckles.

What is a comfortable seat depth for a chair?

For a taller person, a seat depth of 23″ to 25″ is a good option, and for a smaller person, a seat depth of about 20″ could work well.

How much space is needed behind a dining room chair?

2) Maintaining at least 36” of circulation space around your table is a safe measure for everyone’s mobility and ensuring there’s enough room to untuck your chair and rise comfortably.

What is the best height for a chair?

A seat height that ranges from about 16 to 21 inches off the floor should work for most people. This allows the user to have his or her feet flat on the floor, with thighs horizontal and arms even with the height of the desk.

How is chair depth measured?

Overall Depth

From the front-most point to the back-most point. Usually from the front of the seat cushion to the back-most part of the frame.

What is a comfortable height for a dining table?

To provide an ergonomic and visually pleasing sense of levels, your standard dining table should be between 28 and 30 inches (71 to 76cm) in height, and dining chairs should be 17 to 19 inches (45 to 50cm) to match.


  1. https://chairsource.ca/blogs/designer-advice/81669761-how-to-pick-a-chair
  2. https://www.onlinefabricstore.com/makersmill/how-to-measure-dining-room-chairs-for-upholstery-fabric/
  3. https://www.dimensions.com/collection/side-chairs-dining-chairs
  4. https://www.oakfurnitureland.co.uk/blog/your-dining-room-measurement-guide/
  5. https://www.dimensions.com/element/generic-c-chair
  6. https://www.danetti.com/blogs/lifestyle/how-to-choose-the-right-dining-chair-the-ultimate-dining-chair-guide
  7. https://www.houseofhome.com.au/how-to-measure-chairs/
  8. https://www.lakeland-furniture.co.uk/blog/post/blog-post-dining-chair-size-height-width
  9. https://www.cuemath.com/measurement/measuring-length/
  10. https://www.oakfurnitureland.co.uk/page/dining-table-sizes-how-to-choose-the-right-table.html
  11. https://www.apartmenttherapy.com/dimensions-to-follow-proper-furniture-spacing-basics-149156
  12. https://medleyhome.com/blogs/gather/top-5-things-to-find-the-most-comfortable-couch
  13. https://aldenmillerinteriors.com/how-to-choose-a-new-dining-room-table/
  14. https://www.spine-health.com/wellness/ergonomics/office-chair-choosing-right-ergonomic-office-chair
  15. https://www.carolinachair.com/measure.html
  16. https://rapportfurniture.com/blogs/rapport-furniture/standard-dining-table-dimensions